Dell Studio 1557 Service Manual Download Page 10

Page: 10 / 49

Back to Contents Page

Coin-Cell Battery

Dell Studio™ 1557/1558 Service Manual

Removing the Coin-Cell Battery

Replacing the Coin-Cell Battery

Removing the Coin-Cell Battery

Follow the instructions in

Before You Begin

Remove the base cover (see

Removing the Base Cover

Use a plastic scribe to pry up the coin-cell battery from the slot.

Replacing the Coin-Cell Battery

Follow the instructions in

Before You Begin

Hold the coin-cell battery with the positive side up.

Slide the coin-cell battery into the slot and gently press until it snaps to the slot.

Replace the base cover (see

Replacing the Base Cover

Back to Contents Page

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working

inside the computer.

1 coin-cell battery 2 plastic scribe

Summary of Contents for Studio 1557


















































Search results

Summary of Contents for Studio 1557

Reviews:

Related manuals for Studio 1557

Brands by name

Popular brands

Dell Studio 1557, Service Manual

Search results

Summary of Contents for Studio 1557

Reviews:

Related manuals for Studio 1557

Brands by name

Popular brands