background image

Back to Contents Page

  

 

 Camera (Optional)  

Dell Studio™ 1435 Service Manual 

 

  

Removing the Camera 

 

  

Replacing the Camera 

 

 

 

 

 

Removing the Camera  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Follow the instructions in 

Removing the Display Assembly

.  

 

 

  

3.

Remove the display bezel (see 

Display Bezel

).  

 

 

  

4.

Remove the two screws securing the camera board.  
 

 

  

5.

Release the securing tabs and disconnect the camera cable from the camera board connector.  
 

 

  

6.

Remove the camera board.  
 

  

 

Replacing the Camera  

 

 

1.

Align the camera board over the screw holes.  
 

 

  

2.

Replace the two screws that secure the camera board to the display cover.  
 

 

  

3.

Connect the camera cable to the connector on the camera board.  
 

 

  

4.

Replace the display bezel (see 

Replacing the Display Bezel

).  

 

 

  

5.

Follow the instructions in 

Replacing the Display Assembly

.  

 

Back to Contents Page

 

 

 

 

CAUTION: 

Before working inside your computer, follow the safety instructions that shipped with your computer. 

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such 

as a connector on the back of the computer).

screw (2) 

camera  

camera cable pull-tab 

Summary of Contents for Studio 1435










































Reviews: