manualshive.com logo in svg

Dell Studio 1435, Service Manual

Share
Download
Dell Studio 1435 Service Manual Download Page 20

 

  

2.

Remove the display bezel (see 

Removing the Display Bezel

).  

 

 

  

3.

Remove the display panel (see 

Removing the Display Panel

).  

 

 

  

4.

Turn the display panel over and place it on a clean surface.  
 

  

 

 

5.

Press the securing clips on either side and disconnect the display cable from the connector on top.  
 

 

 

Replacing the Display Panel Cable 

 

 

1.

Connect the display cable to the connector on top.  
 

 

  

2.

Replace the display panel (see 

Replacing the Display Panel

).  

 

 

  

3.

Replace the display bezel (see 

Replacing the Display Bezel

).  

 

 

  

4.

Follow the instructions in 

Replacing the Display Assembly

.  

 

 

Inverter Board  

 

 

Removing the Inverter Board 

 

 

1.

Follow the instructions in 

Removing the Display Assembly

.  

 

 

  

2.

Remove the display bezel (see 

Removing the Display Bezel

).  

 

 

  

3.

Remove the display panel (see 

Removing the Display Panel

).  

 

 

  

4.

Turn the display panel and disconnect the cables from the connectors on either side of the inverter board.  
 

 

  

5.

Lift the inverter board off the display panel.  
 

  

1 

display cable 

2 

securing clip (2) 

3 

back of display panel 

 

 

 

 

1 

inverter board 

Summary of Contents for Studio 1435










































Reviews:

No comments

Brands by name

Popular brands

Load more brands