Dell SonicPoint ACi Getting Started Guide
32
Mounting the appliance
WARNING:
• Mount in a location away from direct sunlight and
sources of heat. A maximum ambient temperature of
104º F (40º C) is recommended.
• Route cables away from power lines, fluorescent
lighting fixtures, and sources of noise such as radios,
transmitters, and broadband amplifiers
• Ensure that no water or excessive moisture can enter
the unit.
• Allow unrestricted airflow around the unit and through
the vents on the side of the unit. A minimum of 1 inch
(25.44mm) clearance is recommended.
• Consideration must be given to the connection of the
equipment to the supply circuit and that the effect of
overloading the circuits has minimal impact on
overcurrent protection and supply wiring. Appropriate
consideration of equipment nameplate ratings must be
used when addressing this concern.
• This device is not intended for use in the direct field of
view at visual display workplaces. To avoid
incommoding reflections at visual display workplaces,
this device must not be placed in the direct field of
view.
Cable connections
WARNING:
All Ethernet and RS232 (Console) cables are designed for intra-
building connection to other equipment. Do not connect these
ports directly to communication wiring or other wiring that
exits the building where the appliance is located.
Lithium Battery
WARNING:
The Lithium Battery used in the Dell appliance cannot be
replaced by the user. The appliance must be returned to a Dell
authorized service center for replacement with the same or
equivalent type recommended by the manufacturer. If, for any
reason, the battery or Dell appliance must be disposed of, do
so following the battery manufacturer's instructions.
Power supply information for
APL27-0B1
This product's power is provided by the Ethernet cable plugged
in to the “LAN” port, this is called “Power Over Ethernet” or
“POE.” The POE source should only be UL listed marked “Class
