Figure 13. Removing and installing the riser card
1.
screw (10)
2. riser card
3. expansion-card riser module
Next steps
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Installing a riser card
Prerequisites
NOTE: Only supported cards from Dell can be installed in the system.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Follow the safety guidelines listed in Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Remove the expansion-card riser module.
Steps
1.
Insert the riser card into the expansion-card riser module until the card is fully seated.
2.
Secure the card with the screws.
60
