Related Links
Safety instructions
Before working inside your system
Installing the server sled
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Follow the Safety Guidelines listed in safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
Steps
1.
Install the server sled into the system.
NOTE: Pay attention not to damage the airmax connectors during installation.
2.
Push the lever inward to put the server sled into place.
3.
Tighten the two screws to secure the server sled.
Next steps
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Expansion cards and expansion card riser
An expansion card in the computer is an add-on card that can be inserted into an expansion slot on the
computer system board or riser card to add enhanced functionality to the system through the expansion
bus.
NOTE: A System Event Log (SEL) event is logged if an expansion card riser is unsupported or
missing. It does not prevent your system from turning on and no BIOS POST message or F1/F2
pause is displayed.
Expansion card installation guidelines
NOTE: Only supported cards from Dell can be installed in the system.
Your system supports Generation 3 cards.
53
