Figure 12. Installing the supercapacitor
1.
LSI 49571-15 supercapacitor 1
2. fastener (2)
3. extender cable
Next steps
1.
Install the expansion card to the expansion-card riser module.
2.
Install the expansion-card riser module on the system board.
3.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Removing a riser card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Follow the safety guidelines listed in safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Remove the expansion-card riser module.
4.
Remove the expansion card.
Steps
Remove the screws securing the riser card and lift the card away from the riser module.
59
