Dell S2722DGM User Manual Download

Page: 48 / 58

| Operating the monitor

Activate the computer and wake up the monitor to gain access to the

OSD

If you adjust the Brightness level above the default level(default level is 75%), the
following message is displayed:

Yes

S2722DGM

Adjusting to this value will increase power consumption above

the default level. Do you want to continue?

Dell 27 Gaming Monitor

If you press any button other than the power button, the following messages is
displayed depending on the selected input:

Dell 27 Gaming Monitor

S2722DGM

No DP signal from your device.

Press any key on the keyboard or move the mouse or wake it up.

If there is no display, press the monitor button again to select the correct

input source.

If either DisplayPort, HDMI 1 and HDMI 2 input is selected and the corresponding cable
is not connected, a floating dialog box as shown below appears.

S2722DGM

The display will go into Standby Mode in 4 minutes.

www.dell.com/S2722DGM

No DP Cable

Dell 27 Gaming Monitor

Summary of Contents for S2722DGM



























































Search results

Summary of Contents for S2722DGM

Reviews:

Related manuals for S2722DGM

Brands by name

Popular brands

Dell S2722DGM, User Manual

Search results

Summary of Contents for S2722DGM

Reviews:

Related manuals for S2722DGM

Brands by name

Popular brands