background image

8

        |       About your monitor

Product features

The 

Dell 27 Curved Gaming Monitor-S2722DGM

 has an active matrix, Thin-Film 

Transistor (TFT), Liquid Crystal Display (LCD), and LED backlight. The monitor features 
include:

•  68.47 cm (27 in.) viewable area (measured diagonally), 2560 x 1440 (16:9) 

resolution, plus full-screen support for lower resolutions.

•  Color gamut of 99% sRGB.
•  Digital connectivity with DisplayPort and HDMI.
•  Enabled with gaming console VRR supportability.
•  Tilt and height adjustment capabilities. 
•  Removable-pedestal stand and Video Electronics Standards Association (VESA

TM

100 mm mounting holes for flexible mounting solutions.

•  Plug and Play capability, if supported by your computer.
•  On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
•  Game-enhanced features such as Timer, Frame Rate Counter and Dark Stabilizer 

in addition to enhanced game modes such as FPS, MOBA/RTS, SPORTS, or RPG, 
and 3 additional game modes to personalize your preferences. 

•  Power and OSD buttons lock.
•  Security-lock slot.
•  Stand lock.
•  ≤ 0.3 W in Standby mode.
•  AMD FreeSync

TM

 Premium Technology, which minimizes graphic distortions like 

screen tearing and stuttering for smoother, fluid gameplay.

•  Supports high refresh rates of 144 Hz and 165 Hz and a rapid response time of 1 

ms in MPRT mode*.

•  Dell Premium Panel Exchange for peace of mind.
•  Optimize eye comfort with a flicker-free screen and ComfortView feature which 

minimizes blue light emission. 

  

 WARNING: The possible long-term effects of blue-light emission from 

the monitor may cause damage to the eyes, including eye fatigue, digital 
eye strain, and so on. The ComfortView feature is designed to reduce the 
amount of blue-light emitted from the monitor to optimize eye comfort.

* 1 ms is achievable in the MPRT mode and reduces visible motion blur and increases 
image responsiveness. However, this may introduce some slight and noticeable visual 
artifacts into the image. As every system setup and every gamer’s needs are different, 
we recommend that users experiment with the different modes to find the setting that 
is right for them.

Summary of Contents for S2722DGM



























































Reviews: