Dell S2421HGF User Manual Download

Page: 53 / 58

Troubleshooting

│

Missing Pixels

LCD screen has
spots

• Cycle power On-Off.

• Pixel that is permanently Off is a

natural defect that can occur in LCD
technology.

• For more information on Dell Monitor

Quality and Pixel Policy, see Dell
Support site at:

www.dell.com/

pixelguidelines

Stuck-on Pixels

LCD screen has
bright spots

• Cycle power On-Off.

• Pixel that is permanently off is a

natural defect that can occur in LCD
technology.

• For more information on Dell Monitor

Quality and Pixel Policy, see Dell
Support site at:

www.dell.com/

pixelguidelines

Brightness
Problems

Picture too dim or
too bright

• Reset the monitor to factory settings.

• Adjust brightness & contrast controls

via OSD.

Geometric
Distortion

Screen not
centered correctly

• Reset the monitor to factory settings.

Horizontal/
Vertical Lines

Screen has one or
more lines

• Reset the monitor to factory settings.

• Perform monitor self-test feature

check and determine if these lines are
also in self-test mode.

• Check for bent or broken pins in the

video cable connector.

• Run the built-in diagnostics.

Summary of Contents for S2421HGF



























































Search results

Summary of Contents for S2421HGF

Reviews:

Related manuals for S2421HGF

Brands by name

Popular brands

Dell S2421HGF, User Manual

Search results

Summary of Contents for S2421HGF

Reviews:

Related manuals for S2421HGF

Brands by name

Popular brands