Operating
Your
Monitor |
29
OSD Warning Messages
When the
Dynamic Contrast
feature is enabled (in these preset modes:
Game
or
Movie
), the manual brightness adjustment is disabled.
Dell S2X18H/HX
To allow manual adjustment of brightness, the Energy Smart/Dynamic
No
Yes
Contrast will be
switched off.
Do you want to continue?
When the monitor does not support a particular resolution mode, the following
message is displayed:
Dell S2X18H/HX
The current input timing is not supported by the monitor display.
Please change your input timing to
1920x1080, 60Hz
or any
other monitor listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You will see the following message before the
DDC/CI
function is disabled:
Dell S2X18H/HX
The function of adjusting display setting using PC application will be
No
Yes
disabled.
Do you wish to disable DDC/CI function?
When the monitor enters the
Power Save
Mode
, the following message appears:
Dell S2X18H/HX
Entering Power Save Mode.
If you press any button other than the power button, the following messages will
appear depending on the selected input:
Dell S2X18H/HX
No VGA signal from your device.
?
Press any key on the keyboard or move the mouse to wake it up.
the correct input source.
If there is no display, press the monitor button again to select
