Local and Remote Configuration
xxx
|
xxx
71
preemption level of users determines whether they may disconnect another user’s
serial or KVM session with a target device. Preemption levels range from 1 - 4,
with 4 being the highest level. For example, a user with a preemption level of 4
may preempt other level 4 users, as well as those with a level 1, 2, or 3 setting.
To change the Local Port User Authentication (Administrator only):
1
From the side navigation bar, select
Ports - Local Port UI
to open the
Local Port UI Settings screen.
2
Select or deselect the
Disable Local Port User Authentication
checkbox.
3
If
Disable Local Port User Authentication
is checked, select one of the
following options from the User Access Level drop-down menu:
User
,
User
Administrator,
or
RCS Administrator
.
4
Click
Save
.
Modem Settings
From the RCS Modem Settings screen, you can configure several modem
settings, as well as view the following modem settings: Local Address, Remote
Address, Subnet Mask, and Gateway.
For information on connecting your switch to a modem, see "Connecting the
RCS Hardware" on page 25.
To configure modem settings:
1
From the side navigation bar, select
Ports - Modem
to open the Modem
Settings screen.
2
Either enable or disable the
Modem sessions can preempt digital sessions
checkbox.
3
Select an Authentication Timeout time from 30 to 300 seconds, and an
Inactivity Timeout time from 1 to 60 minutes.
4
Select
Save
.
