Local and Remote Configuration
xxx
|
xxx
61
that power device: Name, Description, Status, Version, Sockets, Vendor Name,
Model, and Input Feeds.
If a target device is connected to a power control device outlet, you can turn on,
turn off or cycle (turn off, then turn on) the target device.
To turn on, turn off or power cycle a target device:
1
From the side navigation bar, click
Ports - Power Devices
to open the
Power Devices screen.
2
Click the name of the unit you wish to configure and select
Outlet List
.
3
Select the checkbox to the left of the outlet(s) that you wish to configure.
4
Click
On
,
Off,
or
Cycle
, as desired.
To delete offline power devices:
1
From the side navigation bar, click
Ports - Power Devices
to open the
Power Devices screen.
2
Click
Delete Offline
.
To change the minimum on time, off time or wake up state:
1
From the side navigation bar, click
Ports - Power Devices
to open the
Power Devices screen.
2
Click the name of the unit you wish to configure and select
Outlets
.
3
Click the outlet name that you wish to modify.
4
Use the drop-down windows to alter the desired settings and click
Save
.
Associated Target Servers and Power Outlets
In the OBWI Target List page, power control actions are selectable for a target
with linked outlets. Selecting the Ports - Power Devices tabs, and then clicking
on a device name will display the Device Settings, Device Firmware Upgrade,
and Outlet List tabs. Click the Outlet List tab to display the outlets linked with
a target device.
