Dell Precision WorkStation Vostro 220 System Service Manual Download Page 45

Page: 45 / 71

Great user manuals database on

UserManuals.info

Install the processor heat sink/fan assembly (see

Replacing the Processor Heat Sink/Fan Assembly

Connect the power supply cables to the system board (see

System Board Components

for connector locations).

Connect all front panel cables to the system board (see

System Board Components

for connector locations).

Connect all the data cables from the drives to the system board (see

System Board Components

for connector locations).

Connect any additional cables to the system board as required.

Install all expansion cards (see

Installing a PCI or PCI Express Card

10.

Slide the optical drive back fully into the drive bay.

11.

Check all cable connections throughout the computer chassis to ensure that they are secure. See

System Board Components

to help identify connectors

on the system board.

12.

Follow the procedure in

After Working on Your Computer

Back to Contents Page

Summary of Contents for Precision WorkStation Vostro 220 System








































































Search results

Summary of Contents for Precision WorkStation Vostro 220 System

Reviews:

Related manuals for Precision WorkStation Vostro 220 System

Brands by name

Popular brands

Dell Precision WorkStation Vostro 220 System, Service Manual

Search results

Summary of Contents for Precision WorkStation Vostro 220 System

Reviews:

Related manuals for Precision WorkStation Vostro 220 System

Brands by name

Popular brands