Dell Precision 610, Service Manual, Page: 55 / 96

Removing and Replacing Parts 4-1
& + $ 3 7 ( 5
5HPRYLQJDQG5HSODFLQJ3DUWV
T his chapter provides procedures for removing the components, assemblies,
and subassemblies in the Dell Precision 610 mini tower systems.
Unless otherwise noted, each procedure assumes the following:
‡
You have performed the steps in “Precautionary Measures” found later in
this chapter.
‡
You have removed the computer cover.
‡
You can replace or reinstall a part by performing the removal procedure in
reverse order unless additional information is provided.
5HFRPPHQGHG7RROV
Most of the procedures in this chapter require the use of one or more of the
following tools:
‡
Small flat-blade screwdriver
‡
Wide flat-blade screwdriver
‡
#1 and #2 Phillips-head screwdrivers
‡
1/4
-inch nutdriver
‡
Tweezers or long-nose pliers
Also, use a wrist grounding strap as explained in the next section, “Precaution-
ary Measures.”