b.
c.
3.
Perform the following steps to remove the WLAN card from the computer:
a. Remove the screw that secures the WLAN card to the computer.
b. Remove the shield that secure the antenna cables.
c. Disconnect and un-route the antenna cables connected to the WLAN card and remove the
WLAN card from the computer.
Installing the WLAN Card
1.
Insert the WLAN card in its slot in the computer.
2.
Route the antenna cables through the routing channel and connect them to the WLAN card.
3.
Align the shield and tighten the screw to secure the WLAN card to the computer.
4.
Install the:
a.
b.
c.
5.
After working inside your computer
Removing the M.2 Solid State Drive (SSD)
1.
Before working inside your computer
2.
Remove the:
a.
b.
c.
3.
Perform the following steps as shown in the illustration:
a. Remove the screw that secures the shield to the computer.
b. Remove the shield from the computer.
c. Remove the screw that secures the M.2 SSD to the computer.
d. Remove the M.2 SSD away from the computer.
18
