Installing the base cover
1.
Slide the base cover to align with the screw holes on the computer.
2.
Tighten the screws to secure the base cover to the computer.
3.
Install the:
a.
b.
4.
After working inside your computer
.
Removing the hard drive
1.
Before working inside your computer
2.
Remove the:
a.
b.
3.
Perform the following steps as shown in the illustration:
a. Remove the screws that secure the hard drive to the computer [1].
b. Lift the hard-drive latch to the unlock position [2].
c. Slide and lift the hard drive from the computer [3].
11