Table 12. Data Manager Appliance Configuration UI error messages (continued)
Error code
Error message
Troubleshooting steps
●
If the issue persists, contact Dell Customer Support.
CONN0098
Backup network gateway
<
backup_network_gateway_IP
> is not
accessible.
●
Check details on the
Configuration
page.
●
If appliance port is connected in access mode, use VLAN
ID 0.
●
Check DM5500 switch configuration.
●
Check firewall rules.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0100
Failed to validate the NTP server
<
NTP_server_IP
>.
●
Check NTP server connectivity.
●
Check firewall rules for UDP port 123.
●
Use a valid NTP server.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0110
Data network IP address <
IP
> is in use.
●
Use a data network IP address that is not in use.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0111
Management network IP address <
IP
> is in
use.
●
Use a management network IP address that is not in use.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0112
Data network IP addresses <
IP_x
> and
<
IP_y
> are in use.
●
Use a data network IP addresses that are not in use.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0115
IP addresses <
IP_x
> and <
IP_y
> are in use.
●
Use IP addresses that are not in use.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0116
VLAN ID <
VLAN_ID
> is in use.
●
Use a VLAN ID that is not in use.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0117
IP address <
IP
> is in use.
●
Use an IP address that is not in use.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0118
IP addresses <
IP_x
> and <
IP_y
> are not
in same subnet range of gateway IP address
<
gateway_IP
>.
●
Use the IP addresses that are in same subnet range of the
gateway.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0119
IP addresses <
IP_x
> and <
IP_y
> are not in
same subnet range.
●
Use the IP addresses that are in same subnet range.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0120
IP address <
IP_x
> not in same subnet range
of gateway IP address <
IP_y
>.
●
Use the IP address that is in the same subnet range of the
gateway.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0121
IP addresses <
IP_x
> and <
IP_y
> are not
in same subnet range of gateway IP address
<
gateway_IP
>.
●
Use the IP addresses that are in the same subnet range of
the gateway.
●
Click
Back
and re-submit the configuration.
●
If the issue persists, contact Dell Customer Support.
CONN0122
IP addresses <
IP_x
> and <
IP_y
> are not in
same subnet range.
●
Use the IP addresses that are in the same subnet range.
●
Click
Back
and re-submit the configuration.
Troubleshooting
47
