Dell PowerEdge M420, Reference Manual

Page: 374 / 1682

374
Ethernet Configuration Commands
console(config)#interface gigabitethernet 1/0/5
console(config-if-1/0/5)# description RD_SW#3
duplex
Use the duplex command in Interface Configuration mode to configure the
duplex operation of a given Ethernet interface. To restore the default, use the
no form of this command.
Syntax
duplex
{
auto
|
half
|
full
}
no duplex
Parameter Description
Default Configuration
Auto is enabled by default.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
When duplex is configured to auto, auto negotiation is enabled for the port.
This configuration cannot be done on SFP module ports as they operate only
in full duplex mode.
Parameter Description
auto Auto negotiation is enabled for the port.
half Force half-duplex operation.
full Force full-duplex operation.
2CSPC4.XModular-SWUM200.book Page 374 Thursday, March 10, 2011 11:18 AM