Dell PowerEdge M420, Reference Manual

Page: 322 / 1682

322
DHCP Management Interface Commands
Examples
The following example shows the output from this command when the
device has leased two IPv4 addresses from the DHCP server.
console#show dhcp lease
IP address: 10.1.20.1 on interface VLAN10
Subnet mask: 255.255.255.0
DHCP Lease server: 10.1.20.3, state: 5 Bound
DHCP transaction id: 0x7AD
Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs
Retry count: 0
IP address: 10.1.1.2 on interface VLAN20
Subnet mask: 255.255.255.0
DHCP Lease server: 10.1.1.1, state: 5 Bound
DHCP transaction id: 0x11EB
Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs
Retry count: 0
console#show dhcp lease interface vl10
IP address: 10.1.20.1 on interface VLAN10
DHCP Lease server The IPv4 address of the DHCP server that leased the address.
State
State of the DHCPv4 Client on this interface.
DHCP transaction
id
The transaction ID of the DHCPv4 Client.
Lease The time (in seconds) that the IP address was leased by the
server.
Renewal The time (in seconds) when the next DHCP renew Request is
sent by DHCPv4 Client to renew the leased IP address.
Rebind The time (in seconds) when the DHCP Rebind process starts.
Retry count Number of times the DHCPv4 client sends a DHCP
REQUEST message before the server responds.
Term Description
2CSPC4.XModular-SWUM200.book Page 322 Thursday, March 10, 2011 11:18 AM