Dell PowerEdge M420, Reference Manual

Page: 1495 / 1682

SNMP Commands
1491
•
filter-name
— Specifies the label for the filter record that is being updated
or created. The name is used to reference the record. (Range: 1-30
characters.)
•
oid-tree
— Specifies the object identifier of the ASN.1 subtree to be
included or excluded from the view. To identify the subtree, specify a text
string consisting of numbers, such as
1.3.6.2.4
, or a word, such as
system
. Replace a single subidentifier with the asterisk (*) wildcard to
specify a subtree family; for example,
1.3.*.4
.
• included — Indicates that the filter type is included.
• excluded — Indicates that the filter type is excluded.
Default Configuration
No filter entry exists.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same filter record. Later
lines take precedence when an object identifier is included in two or more
lines.
The filter name may include any printable characters except a double quote
or question mark. Enclose the string in double quotes to include spaces
within the name. The surrounding quotes are not used as part of the name.
The CLI does not filter illegal characters and may accept entries up to the
first illegal character or reject the entry entirely.
Examples
The following example creates a filter that includes all objects in the MIB-II
system group except for sysServices (System 7) and all objects for interface 1
in the MIB-II interfaces group.
console(config)# snmp-server filter user-filter
system included
console(config)# snmp-server filter user-filter
system.7 excluded
2CSPC4.XModular-SWUM200.book Page 1491 Thursday, March 10, 2011 11:18 AM