Dell PowerEdge C8000XD Hardware Owner'S Manual Download Page 77

Page: 77 / 82

Getting Help

Getting Help

Contacting Dell

For customers in the United States, call 800-WWW-DELL (800-999-3355).

NOTE:

If you do not have an active Internet connection, you can find contact

information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options.

Availability varies by country and product, and some services may not be

available in your area. To contact Dell for sales, technical support, or

customer service issues:

Visit support.dell.com.

Click your country/region at the bottom of the page. For a full listing of

country/region, click All.

Click All Support from Support menu.

Select the appropriate service or support link based on your need.

Choose the method of contacting Dell that is convenient for you.

Summary of Contents for PowerEdge C8000XD



















































































Search results

Summary of Contents for PowerEdge C8000XD

Reviews:

Related manuals for PowerEdge C8000XD

Brands by name

Popular brands

Dell PowerEdge C8000XD, Hardware Owner'S Manual

Search results

Summary of Contents for PowerEdge C8000XD

Reviews:

Related manuals for PowerEdge C8000XD

Brands by name

Popular brands