Dell PowerEdge 2900, Information Update

Page: 12 / 190

12
Information Update
PCIe Degraded Link
Width Error: Slot n
Expected Link
Width is n
Actual Link
Width is n
Faulty or improperly
installed PCIe card in
the specified slot. Reseat the PCIe card in the
specified slot number. See
“Expansion Cards” in the
Hardware Owner’s Manual .
If the problem persists,
see “Getting Help” in the
Hardware Owner’s Manual .
PCIe Training
Error: Embedded
device
Faulty system board
or riser board. See “Getting Help” in the
Hardware Owner’s Manual .
PCIe Training
Error: Integrated
device
The specified PCIe device
is faulty or improperly
installed. For a SAS controller
daughter card, reseat the
card in the dedicated PCIe
connector. See “Installing a
SAS Controller Daughter
Card” in the
Hardware
Owner’s Manual . If the
problem persists, see
“Getting Help” in the
Hardware Owner’s Manual .
PCIe Training
Error: Slot n
Faulty or improperly
installed PCIe card
in the specified slot. Reseat the PCIe card in the
specified slot number. See
“Expansion Cards” in the
Hardware Owner’s Manual .
If the problem persists,
see “Getting Help” in the
Hardware Owner’s Manual
.
Remote Access
Controller cable
error or incorrect
card in the RAC
slot.
RAC cables not connected,
or RAC card installed in
wrong expansion slot. Check that the RAC cables
are connected, and that the
RAC card is installed in the
correct expansion slot.
See “Installing a RAC Card”
in the
Hardware Owner’s
Manual.
NOTE:
All TPM information messages appear after the BMC option ROM has been
loaded during POST.
Table 1-1. System Messages (continued)
Message Causes Corrective Actions