Configuring the KVM Switch Module
41
To remove password protection from your console:
1
In the
Main
dialog box, click
Setup - Security
.
2
Type your password, and then click
OK
.
3
In the
Security
dialog box, single-click and press <Enter> or double-click in the
New
box.
Leave the box blank. Press <Enter>.
4
Single-click and press <Enter> or double-click in the
Repeat
box. Leave the box blank.
Press <Enter>.
5
Click
OK
if you only want to eliminate your password.
To enable the screen saver mode with no password protection:
1
If your console does not require a password to gain access to the
Security
dialog box,
go to step 2.
- or -
If your console is password protected, see the previous procedure, then go to step 2.
2
Select
Enable Screen Saver
.
3
Type the number of minutes for delay time (from 1 to 99) that you want to delay activation
of the screen saver.
CAUTION:
Monitor damage can result from the use of Energy mode with monitors not compliant with
ENERGY STAR.
4
Choose
Energy
if your monitor is ENERGY STAR compliant; otherwise select
Screen
.
5
(Optional) Click
Test
to activate the screen saver test which lasts 10 seconds then returns you
to the
Security
dialog box.
6
Click
OK
.
NOTE:
Activation of the screen saver mode disconnects the server module.
To exit the screen saver mode:
Press any key or move your mouse.
To turn off the screen saver:
1
In the
Security
dialog box, clear
Enable Screen Saver
.
2
Click
OK
.
To immediately turn on the screen saver:
Press <Print Screen>, then press <Pause>.
NOTE:
Enable Screen Saver
must be selected in the
Security
dialog box.
Summary of Contents for PowerEdge 1955
Page 2: ......
Page 34: ...32 General System Configuration ...
Page 84: ...82 Configuration générale du système ...
