6
Dell PowerConnect W-IAP175 Outdoor Instant Access Point
| Installation Guide
W-IAP175AC LED Status Indicators
The W-IAP175 include visual indicators for power, link, heat and radio status. Additionally, each radio has a four-
LED array that indicates received signal strength (RSSI).
Figure 3
LED Layout
Table 4
lists the meanings of the LEDs on the W-IAP175AC outdoor access points.
RSSI (Radio 0)
RSSI Level for Radio 0 Off
RSSI disabled/no signal
4 Step Progressive Bars
(Red)
25/50/75/100%
Each bar represents a progressive increase in
signal strength, with 4 bars representing
maximum signal strength (100%).
Minimum data rate: One lit LEDs
Maximum data rate: Four lit LEDs
RSSI (Radio 1)
RSSI Level for Radio 1 Off
RSSI disabled/no signal
4 Step Progressive Bars
(Blue)
25/50/75/100%
Each bar represents a progressive increase in
signal strength, with 4 bars representing
maximum signal strength (100%).
Minimum data rate: One lit LEDs
Maximum data rate: Four lit LEDs
Table 3
W-IAP175P LED Status Indicators (Continued)
LED
Function
Indicator
Status
NOTE: The RSSI LED indicators represent varying degrees in the RSSI level. The absence of a signal is indicated by no LED
response, and full signal strength is indicated when all four LEDs are active and lit.
Table 4
W-IAP175AC LED Status Indicators
LED
Function
Indicator
Status
P/S
AP Power/Ready
Status
Off
No power to AP
Blinking
Device booting, not ready
On
Device ready
P/S
ENT
POE HEAT
RSSI for Radio 1
RSSI for Radio 0
