16
Dell PowerConnect W-IAP175 Outdoor Instant Access Point
| Installation Guide
Wrapping of Butyl Rubber
1. Cut a 3/4” (19 mm) strip of butyl rubber.
2. Wrap the strip of rubber around the taped connector (
Figure 9
)
3. Join the two ends by pushing them together until there is no longer a seam (
Figure 10
).
Figure 9
Butyl Rubber Placement
Figure 10
Butyl Rubber Wrap
Cut 3/4” strip
of rubber
Squeeze thinner
& wider
Wrap rubber
around base
of antenna
mount and
lightning
arrestor
AP175_13
Wrap rubber
around base
of antenna
mount and
lightning
arrestor
Squeeze to
bond rubber
to itself
AP175_14
Rubber will
be wrapped
with 4 layers
of tape
