Dell PowerConnect W-IAP175 Outdoor Instant Access Point
| Installation Guide
19
Wrapping of Butyl Rubber
1. Cut a piece of butyl rubber large enough to wrap around the connector and extended past the first layer of
tape.
2. Wrap the strip of rubber around the taped connector (
Figure 13
)
3. Join the two ends by pushing them together until there is no longer a seam (
Figure 14
).
Figure 13
Butyl Rubber Placement
Figure 14
Butyl Rubber Wrap
Stretch thinner
& wider
AP175_18
Wrap rubber
around connector
and cable
Squeeze to
bond rubber
to itself
Rubber will
be wrapped
with 4 layers
of tape
AP175_19
Wrap rubber
around connector
and cable
