Dell PowerConnect J-EX8208, Software Manual

Page: 986 / 3660

Table 123: Port Edit Options (continued)
Your Action Function Field
1. To specify an IPv4 address, select the check box
IPv4 address .
2. Type an IP address—for example:
10.10.10.10
.
3. Enter the subnet mask or address prefix. For
example, 24 bits represents
255.255.255.0
.
4. Click OK .
Specifies an IPv4 address for the interface.
NOTE: If the IP address is cleared, the interface
still belongs to the
inet
family.
IPv4 Address
1. To specify an IPv6 address, select the check box
IPv6 address
.
2. Type an IP address—for example:
2001:ab8:85a3::8a2e:370:7334 .
3. Enter the subnet mask or address prefix.
4. Click
OK
.
Specifies an IPv6 address for the interface.
NOTE: If the IP address is cleared, the interface
still belongs to the
inet
family.
IPv6 Address
Table 124: Recommended CoS Settings for Port Roles
Recommended Settings CoS Parameter
There are four forwarding classes:
• voice —Queue number is set to 7.
•
expedited-forwarding —Queue number is set to 5.
•
assured-forwarding
—Queue number is set to 1.
•
best-effort
—Queue number is set to 0.
Forwarding Classes
The schedulers and their settings are:
• Strict-priority—Transmission rate is set to 10 percent and buffer size to 5 percent.
• Expedited-scheduler—Transmission rate is set to 30 percent, buffer size to 30 percent, and
priority to
low
.
• Assured-scheduler—Transmission rate is set to 25 percent, buffer size to 25 percent, and
priority to
low
.
• Best-effort scheduler—Transmission rate is set to 35 percent, buffer size to 40 percent, and
priority to
low .
Schedulers
When a desktop and phone, routed uplink, or layer 2 uplink role is applied on an interface, the
forwarding classes and schedulers are mapped using the scheduler map. Scheduler maps
Imports the default
ieee-802.1
classifier configuration and sets the loss priority to
low
for the
code point 101 for the voice forwarding class.
ieee-802.1 classifier
Imports the default
dscp
classifier configuration and sets the loss priority to
low
for the code
point 101110 for the
voice
forwarding class.
dscp classifier
Related
Documentation
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 919
•
•
Monitoring Interface Status and Traffic on page 931
914
Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS