Dell PowerConnect J-EX8208, Software Manual

Page: 2867 / 3660

Table 347: Terms Configuration Parameters (continued)
Your Action Function Field
Click
Add
. Select the policy from the list.
To remove a policy, select it and click
Remove
.
Specifies the name of a policy to evaluate as a subroutine. Policy
Click
More
for advanced configuration. Specifies advanced configuration options for policies. More
Type the IP address. Specifies the area identifier. OSPF Area ID
Select a value from the list. Specifies the origin of the AS path information. BGP Origin
Type a value. Specifies the BGP local preference. Local Preference
Select
External
.
Select the OSPF type from the list.
Specifies the type of route. Route
Click
Add
. Select the AS path from the list. Specifies the name of an AS path regular expression. AS Path
Click Add . Select the community from the
list.
Specifies the name of one or more communities. Community
Destination tab
Select a value from the list. Specifies an address family protocol. Family
Select a value from the list. Specifies a routing instance. Routing Instance
Select a value from the list. Specifies the name of a routing table. RIB
Type a value. Specifies the individual preference value for the route. Preference
Type a value. Specifies a metric value. Metric
To add an interface, select
Add >
Interface . Select the interface from the
list.
To add an address, select
Add > Address
.
Select the address from the list.
To delete an interface, select it and click
Remove
.
Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP). Interface
Click Add and select the protocol from
the list.
To delete a protocol, select it and click
Remove
.
Specifies the name of the protocol from which the route was
learned or to which the route is being advertised. Protocol
Action tab
2795
Chapter 102: Configuring Firewall Filters