Dell PowerConnect J-EX8208, Software Manual

Page: 2059 / 3660

show route protocol
Syntax show route protocol protocol
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
Syntax (J-EX Series
Switch)
show route protocol protocol
<brief | detail | extensive | terse>
Release Information Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Description Display the route entries in the routing table that were learned from a particular protocol.
Options
protocol
—Protocol from which the route was learned:
• access
—Access route for use by DHCP application
• access-internal
—Access-internal route for use by DHCP application
• aggregate
—Locally generated aggregate route
•
atmvpn —Asynchronous Transfer Mode virtual private network
•
bgp —Border Gateway Protocol
•
ccc —Circuit cross-connect
•
direct —Directly connected route
•
dvmrp —Distance Vector Multicast Routing Protocol
•
esis —End System-to-Intermediate System
•
flow —Locally defined flow-specification route.
•
isis —Intermediate System-to-Intermediate System
•
ldp —Label Distribution Protocol
•
l2circuit —Layer 2 circuit
•
l2vpn —Layer 2 virtual private network
•
local —Local address
•
mpls —Multiprotocol Label Switching
•
msdp —Multicast Source Discovery Protocol
•
ospf —Open Shortest Path First versions 2 and 3
•
ospf2 —Open Shortest Path First versions 2 only
•
ospf3
—Open Shortest Path First version 3 only
•
pim
—Protocol Independent Multicast
•
rip
—Routing Information Protocol
•
ripng
—Routing Information Protocol next generation
1987
Chapter 74: Operational Commands for Layer 3 Protocols