Dell PowerConnect 8024, User Configuration Manual

Page: 448 / 1294

448
Configuring Captive Portal
Configuration Overview
The following steps provide an overview of the process you use to configure
the Captive Portal feature.
To configure the switch:
1. If you plan to use a RADIUS server for authentication, configure the
RADIUS server settings on the switch.
2. If authentication is required, configure the user groups to associate with
each Captive Portal.
3. Create (add) the Captive Portals.
4. Configure the Captive Portal settings for each Captive Portal, such as the
verification mode.
5. Associate interfaces with the Captive Portal instances.
6. Download the branding images, such as the company logo, to the switch.
The images you download must be accessible from the switch, either on
the system you use to manage the switch or on a server that is on the same
network as the switch.
7. Customize the authentication, logout, and logout success web pages that a
Captive Portal user will see.
Dell recommends that you use Use Dell OpenManage Administrator to
customize the Captive Portal authentication, logout, and logout success
pages. A Preview button is available to allow you to see the pages that a
Captive Portal user will see.
8. If you use the local database for user authentication, configure the users on
the switch.
9. If you use a RADIUS server for authentication, add the users to the
database on the RADIUS server.
10. Associate interfaces with the Captive Portal instances.
11. Globally enable Captive Portal.
NOTE:
You must use the web interface to download images.