Dell PowerConnect 8024, User Configuration Manual

Page: 1044 / 1294

1044
Configuring RIP
console(config)#
interface vlan 20
console(config-if-vlan20)# ip address 192.168.20.1 255.255.255.0
console(config-if-vlan20)# ip rip
console(config-if-vlan20)#
ip rip receive version both
console(config-if-vlan20)# ip rip send version rip2
console(config-if-vlan20)# exit
console(config)#
interface vlan 30
console(config-if-vlan30)# ip address 192.168.30.1 255.255.255.0
console(config-if-vlan30)# ip rip
console(config-if-vlan30)#
ip rip receive version both
console(config-if-vlan30)# ip rip send version rip2
console(config-if-vlan30)# exit
4
Enable auto summarization of subprefixes when crossing classful
boundaries.
console(config)# router rip
console(config-router)#
auto-summary
console(config-router)# exit
console(config)# exit
5
Verify the configuration
console# show ip rip
RIP Admin Mode.......................... Enable
Split Horizon Mode...................... Simple
Auto Summary Mode....................... Enable
Host Routes Accept Mode................. Enable
Global route changes.................... 0
Global queries.......................... 0
Default Metric.................... Not configured
Default Route Advertise........... 0
console# show ip rip interface brief
Interface IP Address Send
Version
Receive
Version
RIP
Mode
Link
State
---------- ------------ --------- ------- -------- ------
Vl1 0.0.0.0 RIP-2 RIP-2 Disable Down
Vl10 192.168.10.1 RIP-2 Both Enable Down
Vl20 192.168.10.1 RIP-2 Both Enable Down
Vl30 192.168.10.1 RIP-2 Both Disable Down