manualshive.com logo in svg

Dell PERCS140, User Manual

Share
Download
Dell PERCS140 User Manual Download Page 8

Specification

PERC S140

SATA connectors

Discrete on the system board

I/O controller

Intel C621 (C620 series chipset) (onboard SATA)

Communication with the system

Integrated

Software-based RAID for SATA drives

Volume, RAID 1, RAID 0, RAID 5, RAID 10

Pass through SSD support

Yes

Table 3. NVMe Specifications for PERC S140

Specification

PERC S140

NVMe connectors

PCIe/slimline

NOTE: 

Only Dell-compliant NVMe PCIe SSD 2.5 inch Small Form Factor (SFF), or NVMe PCIe SSD Adapters are supported.

Dell-compliant NVMe compatibility

Yes

Communication with end devices

PCIe

Software-based RAID for NVMe PCIe SSDs

Volume, RAID 1, RAID 0, RAID 10

Pass through NVMe PCIe SSD support

Yes

The following table provides PERC S140 virtual disk specifications:

Table 4. Virtual disk specifications for PERC S140 with SATA configuration

Specification

PERC S140

Maximum number of physical disks supported

12

Maximum number of virtual disks supported

16

Minimum virtual disk size

102 MB

Maximum number of physical disks per virtual disk

12

Maximum number of virtual disks per physical disk

16

Maximum number of physical disks in a volume

1

Maximum number of physical disks in a RAID 0

12

Maximum number of physical disks in a RAID 1

2

Maximum number of physical disks in a RAID 5

12

Maximum number of physical disks in a RAID 10

12

Minimum number of physical disks in a volume

1

Minimum number of physical disks in a RAID 0

2

Minimum number of physical disks in a RAID 1

2

Minimum number of physical disks in a RAID 5

3

Minimum number of physical disks in a RAID 10

4

NOTE: 

The configurations listed in the table above may vary with the hard-drive backplane of your system.

8

Overview

Summary of Contents for PERCS140

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands