![Dell PERCS140 User Manual Download Page 48](http://html.mh-extra.com/html/dell/percs140/percs140_user-manual_79772048.webp)
NOTE:
A boot virtual disk that is in a Failed state prevents the operating system from booting.
To investigate the cause, check for the following:
•
Whether the virtual disk is in
Degraded
status because one of the physical disks of a RAID 1 or RAID 5 virtual disk has failed, or one of
the physical disks of a RAID 10 virtual disk has failed. Press Ctrl+R and verify if the physical disks are offline or missing. Remove and
replace a failed physical disk. A second physical disk failure could cause a
Degraded
virtual disk to change to
Failed
status.
•
Whether the virtual disk is in a
Failed
status because one or more of the physical disks have failed. Press Ctrl+R and verify if the
physical disks are offline or missing. Remove and replace the failed physical disk or disks.
Other errors appearing on the BIOS screen
S140 does not display greater than ten virtual disks in the BIOS
Configuration Utility or CTRL R
Likely Cause:
The function is not supported.
Corrective Action:
Remove all physical disks except for the last one(s) added. Then proceed with deleting the virtual disks that are
not needed. Remember to take account of the virtual disks that are currently being used.
Unable to delete virtual disks when there are more than ten
virtual disks present in the system
Likely cause:
The function is not supported.
Corrective Action:
Remove all physical disks except for the last one(s) added. Then proceed with deleting the virtual disks that are
not needed. Remember to take account of the virtual disks that are currently being used.
Virtual disk rebuild status in the BIOS Configuration Utility or
CTRL R
Likely Cause:
Rebuild is not supported in the
BIOS Configuration Utility (<CTRL><R>)
.
Corrective Action:
Boot to a supported operating system. Rebuild starts. To view rebuild status, install a supported storage application.
Physical disk - related errors
The physical disk fails
If the physical disk fails, check the following causes:
•
A physical disk is not visible in the BIOS Configuration Utility or is offline
•
A physical disk is highlighted red at the BIOS Configuration Utility or Ctrl R
.
48
Troubleshooting your system