Dell P80G, Service Manual

Page: 74 / 131

Steps
1. Locate the LED board slot on your computer.
2. Align and place the LED board on the slot on your computer.
3. Install the single (M2x3) screw that secures the LED board to the computer.
4. Adhere the LED board cable to the adhesive strip on the computer.
5. Connect the LED board cable to the connector on the system board.
Next steps
1. Install the inner frame .
2. Install the WWAN card .
3. Install the WLAN card .
4. Install the HDD .
5. Install the solid state drive .
6. Install the battery .
7. Install the base cover .
8. Follow the procedure in After working inside your computer .
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the solid state drive .
5. Remove the HDD .
6. Remove the WLAN card .
7. Remove the WWAN card .
8. Remove the inner frame .
9. Remove the LED board .
About this task
The figure indicates the location of the speakers and provides a visual representation of the removal procedure.
74 Disassembly and reassembly