Dell P56F Service Manual Download Page 38

Page: 38 / 87

Removing the fans

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in

Before working inside your computer

. After working inside your computer,

follow the instructions in

After working inside your computer

. For more

safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Topics:

•

Prerequisites

•

Procedure

Prerequisites

Remove the

base cover

Remove the

battery

Procedure

Remove the screws that secure the video fan (JFAN_2) to the system board.

Disconnect the touch-screen cable from the system board.

Peel off the tape that secures the touch-screen cable to the video fan
(JFAN_2).

Note the routing of the touch-screen cable and remove the cable from the
routing guides on the video fan (JFAN_2).

Disconnect the video fan (JFAN_2) cable from the system board.

Lift the video fan (JFAN_2) away from the palm-rest assembly.

Removing the fans

Summary of Contents for P56F
























































































Search results

Summary of Contents for P56F

Reviews:

Related manuals for P56F

Brands by name

Popular brands

Dell P56F, Service Manual

Search results

Summary of Contents for P56F

Reviews:

Related manuals for P56F

Brands by name

Popular brands