Dell P145G Service Manual Download Page 4

Page: 4 / 75

Installing the display assembly..................................................................................................................................38

I/O board..............................................................................................................................................................................41

Removing the I/O board.............................................................................................................................................41
Installing the IO board................................................................................................................................................ 42

Heat sink (integrated graphics)..................................................................................................................................... 43

Removing the heat sink (integrated graphics).....................................................................................................43
Installing the heat sink (integrated graphics).......................................................................................................44

Heat sink (discrete graphics)......................................................................................................................................... 45

Removing the heat sink (discrete graphics).........................................................................................................45
Installing the heat sink (discrete graphics)........................................................................................................... 46

Power button......................................................................................................................................................................47

Removing the power-button.....................................................................................................................................47
Installing the power button....................................................................................................................................... 47

Power button with fingerprint reader.......................................................................................................................... 48

Removing the power-button with fingerprint reader......................................................................................... 48
Installing the power-button with fingerprint reader........................................................................................... 49

System board..................................................................................................................................................................... 50

Removing the system board.....................................................................................................................................50
Installing the system board....................................................................................................................................... 52

Palm-rest and keyboard assembly................................................................................................................................ 54

Removing the palm-rest and keyboard assembly................................................................................................ 54
Installing the palm-rest and keyboard assembly.................................................................................................. 55

Chapter 3: Drivers and downloads............................................................................................... 56

Chapter 4: System setup............................................................................................................. 57

Updating BIOS on systems with BitLocker enabled............................................................................................63
Updating your system BIOS using a USB flash drive..........................................................................................63

Flashing the BIOS from the F12 One-Time boot menu............................................................................................ 64
System and setup password...........................................................................................................................................67

Chapter 5: Troubleshooting......................................................................................................... 70

Handling swollen Lithium-ion batteries........................................................................................................................ 70

Locate the Service Tag or Express Service Code of your Dell computer

..............................................70

Contents

Summary of Contents for P145G












































































Search results

Summary of Contents for P145G

Reviews:

Related manuals for P145G

Brands by name

Popular brands

Dell P145G, Service Manual

Search results

Summary of Contents for P145G

Reviews:

Related manuals for P145G

Brands by name

Popular brands