2. In sequential order (1>2>3>4>5>6>7) tighten the seven captive screws (M2x2) that secure the heat sink to the system
board.
Next steps
1. Install the
.
2. Exit
.
After working inside your computer
.
Power button
Removing the power-button
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
heat sink (integrated graphics)
or the
, whichever applicable.
About this task
The following image(s) indicate the location of the power-button and provides a visual representation of the removal procedure.
Steps
Lift the power-button with optional fingerprint-reader off the palm-rest and keyboard assembly.
Installing the power button
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
Removing and installing components
47
