Dell P104F Page 13 Service Manual Download

Page: 13 / 113

Removing and installing components

NOTE:

The images in this document may differ from your computer depending on the configuration you ordered.

Topics:

•

Recommended tools

•

Screw list

•

Subscriber Identity Module (SIM) card

•

Micro Secure Digital (SD) Card

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Camera/microphone module

•

•

•

•

•

Dummy SIM-card slot filler

•

Palm-rest assembly

Recommended tools

The procedures in this document may require the following tools:

●

Phillips screwdriver #0

●

Plastic scribe

Screw list

NOTE:

When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and

then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.

Removing and installing components

Summary of Contents for P104F


















































































































Search results

Summary of Contents for P104F

Reviews:

Related manuals for P104F

Brands by name

Popular brands

Dell P104F, Service Manual

Search results

Summary of Contents for P104F

Reviews:

Related manuals for P104F

Brands by name

Popular brands