Removing and Replacing Parts
4-3
S
tand for Vertical Orientation
Figure 4-1. Optional Stand Removal
To remove the stand, if one is installed, follow these steps (see Figure 4-1):
1. Place the right side of the computer on a flat work surface.
2. Unscrew the captive screw using your fingers or a wide flat-blade
screwdriver.
3. Pull the stand away from the computer.
Disengage the locator pins that position and help secure the stand to the
computer.
When reinstalling the stand, align the front edge of the stand with the groove
between the front bezel and the computer cover. Move the stand until the loca-
tor pins engage the holes in the side of the computer. The locator pins are keyed
for correct installation.
captive screw
locator pins (2)
(on underside of stand)
front bezel