4.
Rotate the front panel away from the computer to release the hooks on the opposite edge of the panel from the
chassis.
Installing the Front Bezel
1.
Insert the hooks along the bottom edge of the front bezel into the slots on the chassis front.
2.
Rotate the bezel toward the computer to engage the front-bezel retention clips until they click into place.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Expansion Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Press the tab to release the latch.
4.
Pull the release lever away from the PCI x16 card until you release the securing tab from the dent in the card. Lift
the card out of its connector and remove it from the system board.
10
