Installing the Intrusion Switch
1.
Place the intrusion switch on the computer and tighten the screw to secure it to the chassis.
2.
Thread the cable along the notches on the chassis and connect the intrusion switch to the connector on the system
board.
3.
Install:
a) system-board shield
b) VESA mount bracket
c) back cover
d) VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Wireless Local Area Network (WLAN) Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
d) system-board shield
3.
Disconnect the WLAN cables. Remove the screws that secure the WLAN card to the system board. Remove the
WLAN card from the connector.
18
Summary of Contents for OptiPlex 9010 AIO
Page 1: ...Dell OptiPlex 9010 All In One Owner s Manual Regulatory Model W04C Regulatory Type W04C001 ...
Page 50: ...50 ...
Page 52: ...52 ...
Page 58: ...58 ...
