Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a) VESA stand
b) back cover
c) system-board shield
3.
Press the release latch away from the battery. The battery pops out from the socket, lift the coin-cell battery out of
the computer.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery into its slot on the system board.
2.
Press the coin-cell battery downward until the release latch springs back into place and secures it.
3.
Install:
a) system-board shield
b) base cover
c) VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Optical Drive
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
3.
Remove the screws that secure the optical-drive bracket to the computer.
13
Summary of Contents for OptiPlex 9010 AIO
Page 1: ...Dell OptiPlex 9010 All In One Owner s Manual Regulatory Model W04C Regulatory Type W04C001 ...
Page 50: ...50 ...
Page 52: ...52 ...
Page 58: ...58 ...
