Dell OptiPlex 7440 All-In-One W11C, Owner'S Manual

Page: 20 / 80

Solid State Drive — optional
Removing the SSD card
1. Follow the procedure in Before working inside your computer .
2. Remove the:
a) stand
b) back cover
c) system board shield
3. To remove the SSD card:
a) Remove the screw that secures the SSD card to the computer [1].
NOTE: System is shipped with 2.5 inch SATA drive on the ODD drive port (Optional).
b) Lift the SSD card away from the connector [2].
Installing the SSD card
1. Insert the SSD card into the connector.
2. Tighten the screw to secure the SSD card to the system board.
3. Install the:
a) system board shield
b) back cover
c) stand
4. Follow the procedure in After working inside your computer .
20 Disassembly and reassembly