Option
Description
Password
Configuration
Allows you to determine the minimum and maximum length of Administrator and System passwords.
Password Bypass
Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
•
Disabled
•
Reboot bypass
Default setting: Disabled
Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting:
Allow Non-Admin Password Changes
is selected.
TPM 1.2 Security
Allows you to enable the Trusted Platform Module (TPM) during POST. This option is enabled by default. The
options are:
•
Clear
•
PPI Bypass for Enabled Commands
•
PPI Bypass for Disabled Commands
•
Attestation Enable
•
Key Storage Enable
•
SHA - 256
NOTE:
Activation, deactivation, and clear options are not affected if you load the setup program's
default values. Changes to this option take effect immediately.
Computrace (R)
Allows you to activate or disable the optional Computrace software The options are:
•
Deactivate
•
Disable
•
Activate
NOTE:
The Activate and Disable options will permanently activate or disable the feature and no
further changes will be allowed
Default setting: Deactivate
Chassis Intrusion
This field controls the chassis intrusion feature. The options are:
•
Disabled
•
Enabled
Default setting: Disabled
CPU XD Support
Allows you to enable or disable the Execute Disable mode of the processor.
Enable CPU XD Support (default)
OROM Keyboard
Access
Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot. The
options are:
•
Enabled
•
One Time Enable
•
Disabled
Default setting: Enable
Admin Setup
Lockout
Allows you to enable or disable the option to enter setup when an admin password is set.
•
Enable Admin Setup Lockout - This option is disabled by default.
HDD Protection
Support
Allows you to enable or disable the HDD Protection feature.
•
HDD Protection Support - This option is disabled by default.
68
System setup
Summary of Contents for OptiPlex 7440 All-In-One W11C
