Dell OptiPlex 7080 Tower Service Manual Download Page 4

Page: 4 / 99

Installing the M.2 2280 PCIe solid-state drive...........................................................................................................36

Memory modules................................................................................................................................................................. 37

Removing the memory modules.................................................................................................................................. 37
Installing the memory modules.....................................................................................................................................38

SD card reader (optional)...................................................................................................................................................38

Removing the SD card reader......................................................................................................................................38
Installing the SD card reader........................................................................................................................................ 39

Processor fan and heat-sink assembly............................................................................................................................. 40

Processor..............................................................................................................................................................................46

Removing the processor...............................................................................................................................................46
Installing the processor................................................................................................................................................. 47

Graphics card....................................................................................................................................................................... 48

Removing the graphics card........................................................................................................................................ 48
Installing the graphics card...........................................................................................................................................49

Graphical processing unit................................................................................................................................................... 50

Removing the powered GPU....................................................................................................................................... 50
Installing the powered GPU..........................................................................................................................................52

Coin-cell battery.................................................................................................................................................................. 53

Removing the coin-cell battery....................................................................................................................................53
Installing the coin-cell battery...................................................................................................................................... 54

WLAN card...........................................................................................................................................................................55

Removing the WLAN card........................................................................................................................................... 55
Installing the WLAN card..............................................................................................................................................56

Slim optical-drive................................................................................................................................................................. 58

Removing the Slim-Optical Disk Drive........................................................................................................................ 58
Installing the Slim-Optical Disk Drive...........................................................................................................................59

Slim optical-drive bracket...................................................................................................................................................60

Removing the slim-ODD bracket.................................................................................................................................60
Installing the slim-ODD bracket................................................................................................................................... 60

Chassis fan............................................................................................................................................................................61

Removing the chassis fan............................................................................................................................................. 61
Installing the chassis fan............................................................................................................................................... 62

VR heat sink......................................................................................................................................................................... 63

Removing the VR heat sink..........................................................................................................................................63
Installing the VR heat sink............................................................................................................................................ 64

Speaker.................................................................................................................................................................................65

Removing the speaker.................................................................................................................................................. 65
Installing the speaker.....................................................................................................................................................66

Power button....................................................................................................................................................................... 67

Removing the power button........................................................................................................................................ 67
Installing the power button...........................................................................................................................................68

Power-supply unit............................................................................................................................................................... 69

Removing the power-supply unit................................................................................................................................ 69
Installing the power-supply unit.................................................................................................................................... 71

Contents

Summary of Contents for OptiPlex 7080 Tower




































































































Search results

Summary of Contents for OptiPlex 7080 Tower

Reviews:

Related manuals for OptiPlex 7080 Tower

Brands by name

Popular brands

Dell OptiPlex 7080 Tower, Service Manual

Search results

Summary of Contents for OptiPlex 7080 Tower

Reviews:

Related manuals for OptiPlex 7080 Tower

Brands by name

Popular brands