Back to Contents Page
System Board
Dell™ OptiPlex™ 580 Service Manual—
Small Form Factor
Removing the System Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
optical drive
.
3.
Remove the
hard drive
.
4.
Remove the
expansion card
.
5.
Remove the
memory
.
6.
Remove the
heat sink and processor
.
7.
Disconnect the processor power cable from the system board.
9.
Disconnect the hard-drive and optical-drive data cables from the system board.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
