Back to Contents Page
Chassis Intrusion Switch
Dell™ OptiPlex™ 580 Service Manual—
Small Form Factor
Removing the Chassis Intrusion Switch
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
hard-drive assembly
.
3.
Disconnect the chassis intrusion-switch cable from the system board.
4.
Slide the chassis intrusion switch from its slot in the metal bracket, and then push down the switch to remove it from the computer.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe
®
Flash
®
Player from
Adobe.com
in order to view the illustrations below.
