Removing and installing components
NOTE:
The images used in this chapter are leveraged from the OptiPlex 7480 All-in-One model for illustration purpose
and may slightly vary from the actual system. The images are still applicable to convey the service procedures
accurately.
Topics:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Recommended tools
The procedures in this document may require the following tools:
•
Phillips screwdriver #1
•
Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE:
Some systems have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
2
10
Removing and installing components
