About this task
The following image indicates the location of the audio board and provides a visual representation of the installation procedure.
Steps
1. Align the screw hole on the audio board with the screw hole on the display-assembly base.
2. Replace the screw (M3x5) to secure the audio board to the display-assembly base.
3. Connect the audio-board cable to the system board.
Next steps
1. Install the
.
2. Install the
3. Install the
4. Install the
5. Install the
6. Install the
7. Install the
8. Follow the procedure in
After working inside your computer
.
Antenna modules
Removing the antenna modules
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
.
3. Remove the
(optional).
4. Remove the
.
5. Remove the
6. Remove the
.
7. Remove the
.
78
Removing and installing components